When video freezes, audio cuts out, or the call drops on a VPN or restrictive network, switch to a relay connection from the Network issue detected message or from Help in the live Bevy Virtual room.
A relay connection routes your live call through a different network path so a firewall, VPN, or restrictive Wi-Fi is less likely to block it. The same controls work in Bevy Virtual Meetup and Bevy Virtual Conference while you are in a live video room.
If picture or sound is poor for reasons beyond the network path (browser, device, or Bevy lowering quality on a weak link), start with Video quality and performance. If chat spins while video still works, see Troubleshooting chat loading in Bevy Virtual.
Note: Relay and direct connection options appear in Help only after you have joined a live session room. You will not see them on pages such as the event agenda or sponsor booths.
How do I use a relay connection?
Open Help in the live event room and select Use relay connection — the page reloads and rejoins on a relay path that is less likely to be blocked by a VPN, firewall, or strict Wi-Fi.
- Join the live event room (Meetup session or Conference room).
- Open Help in the session toolbar.
- Select the option you need:
- Use relay connection — switches from a direct connection to a relay connection.
- Switch to direct connection — switches from a relay connection back to a direct connection.
Both options reload the event room, then rejoin the call with the connection you picked. You can switch anytime during a live session, even if the Network issue detected message does not appear.
Tip: Prefer a direct connection when your network allows it. Use relay when a VPN, firewall, or restricted Wi-Fi is blocking the call. When you return to a normal home or office network, select Switch to direct connection so picture and sound can improve.
How do I test my network?
Open Help (in the live room or on the pre-join screen), select Test network, finish the checks in the new tab, then return to the event and refresh if the test finds a problem.
- Select Help in the bottom bar, or on the pre-join screen before you join. Help is a button, not a tab next to Chat or Participants.
- Select Test network. A new tab opens a network and video check.
- Follow every prompt on that page, then return to the event and refresh if the test found a problem.
You can run Test network before you join or after you are in the session. If the call still drops on a restrictive network after a clean test, use How do I use a relay connection? above.
Use the Network issue detected message
If your connection stays interrupted for more than about 30 seconds, Bevy can show a Network issue detected message:
We detected a network issue that may be affecting your connection. This can happen when joining a VPN or strict network. Click below to try a different connection method.
- Try different connection — reloads the event room and rejoins using a relay connection.
- Dismiss — closes the message and keeps your current connection.
Try different connection does the same thing as Use relay connection in Help.
When a relay connection helps
| Situation | What to try |
|---|---|
| Video or audio drops repeatedly | Open Help, then select Use relay connection. |
| Others cannot see or hear you after you check camera and mic | Try relay, then Test network from the same Help menu. If video is still missing after a solid network path, see Video quality and performance. |
| You joined a VPN or corporate network just before the problem | Turn the VPN off if you can. If not, use relay while you stay on that network. |
| You are on strict Wi-Fi (hotel, airport, conference venue, guest network) | Use relay. Switch back to Switch to direct connection when you are on a normal network again. |
Things to know
- A relay connection can add a small amount of lag because traffic takes a longer path. That trade-off is often worth a stable call.
- Your choice applies to the current event session. If you leave and rejoin later, you start on a direct connection again unless you choose relay again.
- For unstable or missing video beyond the network path (browser, device load, or Bevy lowering quality so audio stays usable), see Video quality and performance. Meetup-specific connection detail: About video and quality performance in Bevy Virtual Meetup. Conference-specific tips: Video quality and performance in Bevy Virtual Conference.
Still having trouble?
- Check your internet connection on another site or app.
- Switch from Wi-Fi to a wired connection if you can.
- Disconnect your VPN (if allowed), then rejoin the event.
- Open Help, select Test network, and finish the checks in the new tab.
- Ask your IT team about firewall rules that may block live video.
- Open Help, select Copy support ID, and contact Bevy through Get help in the same Help menu. Include the support ID and a short description of what you see and hear.
For broader attendee checks outside relay and Test network, see Troubleshooting steps for attendees. For picture and sound beyond the network path, return to Video quality and performance.